產品詳情
            • 產品名稱:ZIERICK插針_插座_連接器H1-2-375-G_經銷代理商

            • 產品型號:H1-2-375-G /H1-2-375-T /H1-2-500-G /H1-2-750-T
            • 產品廠商:ZIERICK
            • 產品價格:0
            • 折扣價格:0
            • 產品文檔:
            你添加了1件商品 查看購物車
            簡單介紹:
            韋德科技是ZIERICK插針_插座_連接器H1-2-375-G_經銷代理商中國大陸區域的授權經銷代理商。供應ZIERICK端子/接線頭/連接端子/連接器/插針/插座/接線螺釘/隔離柱/防松〔鎖緊,彈簧〕墊圈等電子器件。部分ZIERICK插針_插座_連接器的Part Number:H1-2-375-G /H1-2-375-T /H1-2-500-G /H1-2-750-T /H1-3-250-T /H1-3-375-T /H1-3-625-T /H1-3-750-T /H1-4-375-T /H1-4-500-14 /H1-4-500-T /H1-5-250-T /H1-5-500-14 /H1-5-500-T /H1-6-375-T /H1-6-500-T /H1-6-625-G /H1-6-750-T /H1-9-500-T /H2-3-750-T /H2-5-375-T。
            詳情介紹:

            TECHNOLOGY OVERVIEW


            ZIERICK插針_連接器H1-2-375-G_韋德科技(深圳)有限公司0755-2665 6615Zierick’s unique header assembly features capillary action to improve solder joint strength. As a result, pin retention force is 50% higher than that of J-Lead type headers. As the capillary action draws the solder, it pulls the header assembly tightly to the PCB. At the same time, co-planarity problems are eliminated because the force generated by the capillary action also pulls the header into proper position over the solder pad – even if the part has been placed off-center.

            A circular solder pad on top of the board and a square solder pad on the bottom are connected to the conductive wall of the plated through hole. The size of the hole is such that it holds the square pin in place, yet leaves four cavities defined by the flat side of the pin and the curved wall of the hole. The cavities promote capillary action by drawing most of the melted solder up through the cavities where it forms a ring at the top side of the header assembly board. This solder ring is a visual indication that the reflow process is perfect and complete.

            ZIERICK插針_連接器H1-2-375-G_韋德科技(深圳)有限公司0755-2665 6615Further, because the header base is made of the same material as the PCB, there are no thermally induced stresses on the solder joint – long term reliability is guaranteed. In addition, deep score lines run across both sides of the header base. The assembly is very flexible and can accommodate board warpage without weakening connections.

            To meet varying application requirements, Zierick headers are available with pins missing at specified positions or with pins of different lengths and sizes. Pins are offered in brass or copper, and optional configurations are available. 


            ZIERICK插針_插座_連接器H1-2-375-G

            ZIERICK插針_連接器H1-2-375-G韋德科技(深圳)有限公司0755-2665 6615


            ZIERICK插針_插座_連接器H1-2-375-G技術應用參數

            ZIERICK插針_連接器H1-2-375-G技術應用參數-韋德科技(深圳)有限公司0755-2665 6615


            FEATURES AND BENEFITS


            • Designed for demanding applications with shock, vibration, and elevated temperatures
            • Capillary Action is utilized to improve solder joint strength and pin retention force - 50% higher than J-lead headers
            • High resistance to thermal shock and thermal cycling due to material selection
            • Co-planarity problems eliminated
            • Very forgiving board placement tolerances
            • Minimal real estate required on board
            • Zierick’s Horizontal Header is easily customized for a combination of different pin lengths and missing pins for proper mating connector orientation



            LOOSE NUMBER OF ROWS PINS PER ROW PIN LENGTH DIMENSIONS FINISH SPECIFICATION
            H1-2-375-G 1 2 0.375" (9.53mm) Gold Plated
            H1-2-375-T 1 2 0.375" (9.53mm) Tin Plated
            H1-2-500-G 1 2 0.500" (12.70mm) Gold Plated
            H1-2-750-T 1 2 0.750" (19.05mm) Tin Plated
            H1-3-250-T 1 3 0.250" (6.35mm) Tin Plated
            H1-3-375-T 1 3 0.375" (9.53mm) Tin Plated
            H1-3-625-T 1 3 0.625" (15.88mm) Tin Plated
            H1-3-750-T 1 3 0.750" (15.88mm) Tin Plated
            H1-4-375-T 1 4 0.375" (9.53mm) Tin Plated
            H1-4-500-14 1 4 0.500" (12.70mm) Gold Plated
            H1-4-500-T 1 4 0.500" (12.70mm) Tin Plated
            H1-5-250-T 1 5 0.250" (6.35mm) Tin Plated
            H1-5-500-14 1 5 0.500" (12.70mm) Gold Plated
            H1-5-500-T 1 5 0.500" (12.70mm) Tin Plated
            H1-6-375-T 1 6 0.375" (9.53mm) Tin Plated
            H1-6-500-T 1 6 0.500" (12.70mm) Tin Plated
            H1-6-625-G 1 6 0.625" (15.88mm) Gold Plated
            H1-6-750-T 1 6 0.750" (19.05mm) Tin Plated
            H1-9-500-T 1 9 0.500" (12.70mm) Tin Plated
            H2-3-750-T 2 3 0.750" (19.05mm) Tin Plated
            H2-5-375-T 2 5 0.375" (9.53mm) Tin Plated
            Pins are 0.025" (0.64mm) Square
            Current Rating: 8/Pin
            U.S. Patent Nos. 6,402,531 B1 and 5,816,668
            Zierick recommends .006" (0.15mm) stencil thickness for most applications. For other stencil thicknesses, call Zierick's product development department.

            ZIERICK插針_連接器H4-4-500-T韋德科技(深圳)有限公司0755-2665 6615

            ZIERICK插針_連接器H1-3-500-T-H_韋德科技(深圳)有限公司0755-2665 6615

            ZIERICK插針__連接器H1-1-500-T_韋德科技(深圳)有限公司0755-2665 6615


            標題:
            內容:
            聯系人:
            聯系電話:
            Email:
            公司名稱:
            聯系地址:
             
             
            注:1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
            2.如有必要,請您留下您的詳細聯系方式!
            亚洲AV永久无码精品一区二区国产| 久久综合一区二区无码| heyzo专区无码综合| 欧美日韩中文国产va另类| 91精品无码久久久久久五月天 | 一本一道色欲综合网中文字幕 | 中文字幕在线无码一区| 亚洲AV无码精品色午夜在线观看| 久久精品aⅴ无码中文字字幕不卡| 无码丰满少妇2在线观看| 特级做A爰片毛片免费看无码 | 国产乱妇无码大片在线观看 | 亚洲AV无码一区二区三区系列| 中文国产成人精品久久不卡| 91嫩草国产在线无码观看| 亚洲av无码潮喷在线观看 | 伊人久久精品无码av一区| 日本中文字幕网站| 中文字幕热久久久久久久| 无码人妻久久一区二区三区蜜桃| 色窝窝无码一区二区三区 | 亚欧免费无码aⅴ在线观看| 亚洲日韩AV一区二区三区中文 | 亚洲第一中文字幕| 伊人久久无码中文字幕| 亚洲精品无码AV中文字幕电影网站 | 97免费人妻无码视频| 人妻少妇偷人精品无码| 亚洲中文字幕久久精品无码APP| 中文字幕精品亚洲无线码一区应用| 亚洲综合日韩中文字幕v在线| 亚洲日韩乱码中文无码蜜桃臀网站| 亚洲无码日韩精品第一页| 无码任你躁久久久久久老妇| 少妇无码?V无码专区在线观看| 男人的天堂无码动漫AV| 久久国产精品无码HDAV| 草草久久久无码国产专区| 国产激情无码一区二区app| 国产精品无码无卡无需播放器| AAA级久久久精品无码区|